Hot Selling Factory Semi Automatic Capsule Filling Machine for T00, 0, 1, 2, 3, 4, 5 Size Capsule

• Customization: Available
• After-sales Service: Engineers Available to Service Machinery Overseas
• Certification: ISO
• Condition: New
• Customized: Customized
• Fill Range: T00,0,1,2,3,4,5
• Filling Principle: Auger Filling
• Machine Type: Capsule Filling Machine
• Main Material: Aluminum, Carbon Steel
• Voltage: 220V
• Warranty: One Year
• Overall Dimension: 1200*700*1650mm
• Packing Dimension: 1650*800*1750mm
• Transport Package: Mood Box
• Specification: 420 KGS
• Trademark: SW
• Origin: Zhejiang, China
• HS Code: 8422400000
• Production Capacity: 10000-25000 Capsules/Hour (Depends on The Capsule

Product Description

Adjust new mould time:	5-8 minutes (for beginner)
Production capacity:	10000-25000 capsules/hour (depends on the capsule size)
Suitable capsule:	000#,00L#,00#,0L#,0#,1#,2#,3#,4#,5# mechanical made standard capsule.
Filled material:	Powder (without wet or sticky); granules.
Total power:	2.12KW
Compressed air:	0.03m 3 /min, 0.7Mpa
Vacuum pump:	Exhaust 40m 3 /h
Overall dimension:	1200*700*1650mm
Packing dimension:	1650*800*1750mm
Gross Weight:	420 KGS

   The semi automatic capsule filling machine is a new efficient equipment based on DTJ-C model (old type) after research and development: easier more intuitive and higher loading in capsule dropping, U-turning, vacuum separation in comparison with the old type.

   The new type of capsule orientating adopts columns pill positioning design, which shortens the time in the replacement of mould from the original 30 minutes to 5-8 minutes. This machine is one type of electricity and pneumatic combined control, automatic counting electronics, programmable controller and frequency conversion speed regulating device. 

   Instead of manual filling, it reduces labor intensity, which is the ideal equipment for capsule filling for small and medium-sized pharmaceutical companies, pharmaceutical research and development institutions and hospital preparation room.

FAQ

1.

Q: Where is your factory located?
A: Our factory is located in Zhejiang province which is near from Ningbo and Shanghai port.

2.
Q: Can I customized the color?
A: We accept Customied not only color but also neck size .design.labels and so on.

3.
Q: How can we guarantee quality?
A: Always a pre-production sample before mass production; Always final Inspection before shipment.

4.
Q: What about the normal lead time?
A: It's around 15-20 days after receiving the deposit.

5.
Q: What types of payment terms do you accept?
A: The payment terms we accept is T/T as usually.Also we accept US$,Euro and RMB also.

6.
Q: What is your shipping way?
A: FOB ,C&F,CIF any is acceptable.For transpoort way ,we could arrange by air ,by sea ,or by express etc.