Plastic Resin Manufacturer Polyethylene HDPE Virgin Granules UV Resistance Grade Plastic Raw Materials Injection Moulding He3488lsw

• Customization: Available
• Industrial Use: Food
• Transparency: Opaque
• Model NO.: HE3488LSW
• Layered: Basic Level
• Hardness: Rigid
• Basic Level: BOPP
• Heat Seal: LDPE
• Functional Layer: VMPET
• Packaging: Bag
• Bag Sealing Methods: Flat Bag Packaging
• Product Name: HDPE Materials
• MOQ: 20 Tons
• Application: Bottles, Sheets
• Color: White
• Type: Virgin Pet Resin
• Trademark: SW
• Origin: Zhejiang, China
• HS Code: 3923300000

Product Description

HDPE	Unit	Typical Value
Mass density	g/cm³	0.941-0.959
Melt flow Rate(190 Centigrade /2.16kg)	g/10min	≤1.0
Tensile yield strength	MPa	≥19.0
Flexural modulus	Mpa	≥965
Elongation@ break	%	≥400
Impact Embrittlement temperature	Centigrade	MAX -118
Dielectric Constant	100KHZ	2.32
	1MHZ	2.31
Loss Tangent	100KHZ	MAX 0.0001
	1MHZ	MAX 0.0001
Volume resistivity	OHM-CM	MIN 1x10 15

HDPE is a white powder or granular product. Non-toxic, tasteless, crystallinity of 80%-90%, softening point of 125-135ºC, use temperature up to 100ºC; hardness, tensile strength and creep are better than low density polyethylene; abrasion
resistance,electrical insulation, toughness and cold resistance are better; chemical stability is good, at room temperature,
insoluble in any organic solvent, resistant to corrosion of acid, alkali and various salts; film permeability to water vapor and
air It is less resistant to aging and less resistant to environmental stress cracking than low-density polyethylene, especially
thermal oxidation will cause its performance to decline, so the resin must be added with antioxidants and ultraviolet absorbers to improve the deficiencies in this regard, and high-density polyethylene film has a lower heat deflection temperature under stress.